Table of Contents |
---|
Scope
This page contains the Kmehrmessages for testing the correctness and visualization of medication scheme information on the caretaker UI (or print ) and patient UI ( or print).
Instructions for EVS use
Any EVS export file mentioned in a test should be uploaded using the EVS-action replace, unless stated otherwise.
The EVS parameter writeAsIs must be set to false.
S04R10: General test of medication scheme information
- Upload this EVS export file (EVS) for your patient with an actor of your choice, let's call this actor ACTOR_B and your patient PATIENT_X.
- Log on to the SUT with a different actor, let's call this actor ACTOR_A
Expected results
TS-1:
Medication scheme information in patient print header
...
- Vitalink: www.vitalink.be/toelichtingms/.
- RSB / RSW :
S04W15: Medication scheme information after local modification
- Execute test "General test of medication scheme information" and save the patient print somewhere. Let's call this print PRINT_1
- Change the posology of one of the medication scheme elements in the SUT. Save the changes but don't upload the changes to Vitalink
- Generate the patient print again. Let's call this print PRINT_2
Expected results
TS-1:
Only the "Date and hour of print" field should have changed in PRINT_2 when compared to PRINT_1. All other fields in the header should not have changed. Since changes have not been uploaded to Vitalink yet, they should not be reflected in the patient print yet.
S04W20: Medication scheme information after removal of medication
Execute test "General test of medication scheme information" and save the patient print somewhere. Let's call this print PRINT_1
Note title Important Make sure that ACTOR_B is the author of the medication scheme in PRINT_1, and not ACTOR_A
Remove one of the medication elements from the medication scheme in the vault, by uploading either this EVS file (EVSc) with EVS-action removeREF, or by uploading this EVS file (EVS) with EVS-action updateschemeREF.
Note title Important This EVS action must be executed by:
- either a third actor which is different from ACTOR_A and ACTOR_B (PREFERRED)
- or ACTOR_A (if you don't have an actor other than ACTOR_A and ACTOR_B)
Let's call the actor who performed the remove action ACTOR_C
- Generate the patient print again. Let's call this print PRINT_2
Expected results
TS-1:
In PRINT_2, the identification of the care provider who changes the medication scheme must equal ACTOR_C.
...