Under construction
This page is still under construction.
Scope
This page contains the Kmehrmessages for testing the interpretation of temporality.
Instructions for EVS use:
IMPORTANT: This test has to be performed using the new version of EVS: EVSg
Before starting each test, the export file mentioned at the beginning of the test should be uploaded using the EVS-action REPLACE and your own test patient, unless otherwise stated.
The EVS parameter writeAsIs must be set to false.
Description:
After reading the medication scheme, the results can be verified in the SUT.
Both in the caretaker and patient UI (and print) the interpretation of the temporality should be similar to the 'expected results' of that test.
Depending on the SUT, the visualisation may vary slightly.
Temporality without alteration
This EVS export file contains all the transactions used for this test.
Verify the following:
- There is a medicationscheme with 12 medications and 3 treatment suspensions.
- If the SUT does not apply logic to the use of temporality, both the patient and caretaker print (and UI) should look like the 'expected results' table below.
- If the SUT does apply logic to the use of temporality, the results may vary and there is currently no set rule for this.
- It should be clear to the user whether or not medication has to be administrated.
Expected results:
| EVSREF | Beginmoment | Endmoment | Treatment Suspension |
|---|---|---|---|
| 100 | 01/01/2016 | ||
| 101 | 01/01/2016 | 31/03/2016 | |
| 102 | 01/01/2016 | 31/01/2016 | |
| 103 | 01/01/2016 | Vanaf 01/04/2016 | |
| 104 | 01/01/2016 | ||
| 105 | 01/01/2016 | 31/03/2016 | |
| 106 | 01/01/2016 | 31/01/2016 | |
| 107 | 01/01/2016 | 31/12/2016 | Vanaf 01/02/2016 |
| 108 | 01/01/2016 | ||
| 109 | 01/01/2016 | 31/03/2016 | |
| 110 | 01/01/2016 | 31/01/2016 | |
| 111 | 01/01/2016 | Vanaf 01/02/2016 |
Temporality with alteration
Preparation:
- Make sure you have done the 'Temporality without alteration' test and that the contents of the vault is still the same. If not, upload this EVS export file using the REPLACE action.
- Add a dot(.) to the 'instructionforpatien' field of every medication in the medicationscheme.
Verify the following:
- Altering the 'instructionforpatient' field did not affect the medicationscheme (other than having a dot(.) in every 'instructionforpatient' field).
- There is a medicationscheme with 12 medications and 3 treatment suspensions.
- If the SUT does not apply logic to the use of temporality, both the patient and caretaker print (and UI) should look like the 'expected results' table above.
- If the SUT does apply logic to the use of temporality, the results may vary and there is currently no set rule for this.
- It should be clear to the user whether or not medication has to be administrated.